Suzhou Volsun Electronics Technology Co., Ltd.
| Quantity: | |
|---|---|
NS-GF200RUB-D
Volsun
Volsun Tear-resistant silicone rubber glass fiber sleeve is woven from alkali-free glass fiber into a tube, coated with silicone rubber on the outer layer of the tube, and then solidified. It has high dielectric strength, good flexibility, heat aging resistance, oil resistance, flame resistance, and temperature resistance up to 200℃. It is widely used for circuit insulation protection of new energy vehicles, special vehicles, rail transit, military industry and aerospace.
Operating temperature: - 40 ℃~200 ℃
Environmental protection standards: RoHS, REACH
Standard colors: transparent, white, black, red, yellow, blue, green, orange, other colors can be customized.
Properties | Typical Data | Test method |
Appearance | No leakage, cracking,etc | GB/T 7113.1-2014 |
Hydrolysis of coating | No coating displacement, adhesion,etc | GB/T 7113.2-2014 |
Cold bending | -40℃, 4h, no cracks, coating peeling and delamination | GB/T 7113.2-2014 |
Flame retardant | HB | UL94 |
Breakdown voltage | Reference standards | GB/T 7113.2-2014 |
Tear strength | ≥50N/mm(Except the size below ID4.0mm) | / |
Size（ mm ） | Wall thickness W（mm） | Standard Packing | ||||
Diameter (mm) | Tolerance (mm) | 1500V | 2500V | 4000V | 7000V | M/Roll |
Φ2.0 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ2.5 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ3.0 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ3.5 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ4.0 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ4.5 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ5.0 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ5.5 | -0.10～0.40 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ6.0 | -0.10～0.40 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ7.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ8.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.65±0.10 | 50 |
Φ9.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.65±0.10 | 50 |
Φ10.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ11.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ12.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ13.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ14.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ15.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ16.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ17.0 | -0.50～1.00 | 0.60±0.20 | 0.60±0.20 | 0.75±0.20 | 0.80±0.20 | 30 |
Φ18.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.75±0.20 | 0.80±0.20 | 30 |
Φ19.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.80±0.20 | 0.85±0.20 | 30 |
Φ20.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.80±0.20 | 0.85±0.20 | 30 |
Φ22.0 | -0.50～1.00 | 0.65±0.20 | 0.75±0.20 | 0.85±0.20 | 0.90±0.20 | 30 |
Φ25.0 | -0.50～1.00 | 0.75±0.20 | 0.85±0.20 | 0.95±0.20 | 1.05±0.20 | 30 |
Remark: Special sizes & packing are available on request.
Silicone rubber coated fiberglass sleeve-Used for insulation protection of motors wiring harness
Volsun Tear-resistant silicone rubber glass fiber sleeve is woven from alkali-free glass fiber into a tube, coated with silicone rubber on the outer layer of the tube, and then solidified. It has high dielectric strength, good flexibility, heat aging resistance, oil resistance, flame resistance, and temperature resistance up to 200℃. It is widely used for circuit insulation protection of new energy vehicles, special vehicles, rail transit, military industry and aerospace.
Operating temperature: - 40 ℃~200 ℃
Environmental protection standards: RoHS, REACH
Standard colors: transparent, white, black, red, yellow, blue, green, orange, other colors can be customized.
Properties | Typical Data | Test method |
Appearance | No leakage, cracking,etc | GB/T 7113.1-2014 |
Hydrolysis of coating | No coating displacement, adhesion,etc | GB/T 7113.2-2014 |
Cold bending | -40℃, 4h, no cracks, coating peeling and delamination | GB/T 7113.2-2014 |
Flame retardant | HB | UL94 |
Breakdown voltage | Reference standards | GB/T 7113.2-2014 |
Tear strength | ≥50N/mm(Except the size below ID4.0mm) | / |
Size（ mm ） | Wall thickness W（mm） | Standard Packing | ||||
Diameter (mm) | Tolerance (mm) | 1500V | 2500V | 4000V | 7000V | M/Roll |
Φ2.0 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ2.5 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ3.0 | -0.10～0.30 | 0.35±0.10 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 100 |
Φ3.5 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ4.0 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ4.5 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ5.0 | -0.10～0.40 | 0.40±0.10 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 100 |
Φ5.5 | -0.10～0.40 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ6.0 | -0.10～0.40 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ7.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.60±0.10 | 100 |
Φ8.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.65±0.10 | 50 |
Φ9.0 | -0.10～0.50 | 0.45±0.10 | 0.50±0.10 | 0.55±0.10 | 0.65±0.10 | 50 |
Φ10.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ11.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ12.0 | -0.20～0.70 | 0.50±0.15 | 0.55±0.15 | 0.65±0.15 | 0.70±0.15 | 50 |
Φ13.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ14.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ15.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ16.0 | -0.30～0.80 | 0.55±0.15 | 0.60±0.15 | 0.70±0.15 | 0.75±0.15 | 50 |
Φ17.0 | -0.50～1.00 | 0.60±0.20 | 0.60±0.20 | 0.75±0.20 | 0.80±0.20 | 30 |
Φ18.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.75±0.20 | 0.80±0.20 | 30 |
Φ19.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.80±0.20 | 0.85±0.20 | 30 |
Φ20.0 | -0.50～1.00 | 0.60±0.20 | 0.65±0.20 | 0.80±0.20 | 0.85±0.20 | 30 |
Φ22.0 | -0.50～1.00 | 0.65±0.20 | 0.75±0.20 | 0.85±0.20 | 0.90±0.20 | 30 |
Φ25.0 | -0.50～1.00 | 0.75±0.20 | 0.85±0.20 | 0.95±0.20 | 1.05±0.20 | 30 |
Remark: Special sizes & packing are available on request.
Silicone rubber coated fiberglass sleeve-Used for insulation protection of motors wiring harness
