Suzhou Volsun Electronics Technology Co., Ltd.
| Quantity: | |
|---|---|
RUBLS-EPDM
Volsun
EPDM Cold Shrink Tube Characteristics
Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing
More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
Simultaneously expands and shrinks with workpieces without clearances, seals tight in harsh environment
Stably sealing the workpieces in windy environment
Well suited for cable less than 1KV
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure
Simple, safe installation, requires no tools or special training. No torches or heat work required
Diameter shrinkage:±50%
Sealing class IP68
Specifications Information
The minimum inner diameter that can be produced: Ф18mm
The maximum inner diameter that can be produced: Ф155mm
The length can be produced based on actual needs, and the maximum length that can be produced is 1meter around.
Note: Special sizes & packing are available on request.
Production Workshop
When the outer diameter of the cable that the cold shrink tube needs to cover is too small, it is necessary to wrap the cable with insulation mastic tape or foam to increase the outer diameter first, and then use the cold shrink tube to achieve a better insulation and sealing effect. Check out the video below to see how to install the foam.
EPDM Cold Shrink Tube Characteristics
Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing
More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubing
Simultaneously expands and shrinks with workpieces without clearances, seals tight in harsh environment
Stably sealing the workpieces in windy environment
Well suited for cable less than 1KV
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure
Simple, safe installation, requires no tools or special training. No torches or heat work required
Diameter shrinkage:±50%
Sealing class IP68
Specifications Information
The minimum inner diameter that can be produced: Ф18mm
The maximum inner diameter that can be produced: Ф155mm
The length can be produced based on actual needs, and the maximum length that can be produced is 1meter around.
Note: Special sizes & packing are available on request.
Production Workshop
When the outer diameter of the cable that the cold shrink tube needs to cover is too small, it is necessary to wrap the cable with insulation mastic tape or foam to increase the outer diameter first, and then use the cold shrink tube to achieve a better insulation and sealing effect. Check out the video below to see how to install the foam.
